Foxconn Destroyer User Manual page 27

BIOS Select Jumper: BIOS_SELECT
This motherboard provides two BIOS ROMs, and user can easily select one of them for operation. The
selection of BIOS ROM can be done by hardware jumper fix or by software BIOS configuration.
The jumper is used to select the booting from BIOS
ROM 1 or BIOS ROM 2. You can refer to the following
table for the setting.
BIOS_SELECT
Definition
1-2 Set Pin 1 and Pin 2 closed
3-4 Set Pin 3 and Pin 4 closed
5-6 (default) Set Pin 5 and Pin 6 closed
7-8 Set Pin 7 and Pin 8 closed
■ Disconnect the power cable before adjusting the jumper settings.
■ Do not clear the CMOS while the system is turned on.
1 2
BIOS ROM 2
BIOS ROM 1
7 8
Description
Force BIOS ROM 1
Force BIOS ROM 2
BIOS select, default is BIOS ROM 1
BIOS select, default is BIOS ROM 2
20
Function