Create Spanned Raid - Foxconn Destroyer User Manual

Create spanned RAID

1. Select "spanned" from the RAID Mode. The menu appears :
RAID Mode: Mirrored
Free Disks
Port Disk Model
0.0 WDC WD1200JD-9 111.79GB
0.0 WDC WD1200JD-9 111.79GB
0.2 Hitachi HDT725
0.1 HDS728080PLA38 76.69GB
0.3 ST3320620AS
[ESC] Quit
2. Select three SATA hard disks to build our Spanned RAID system.
3. Press [TAB] to navigate to left drive panel, then use [→] and [↓] keys to add the hard
disks to the right drive panel.
RAID Mode: Mirrored
Free Disks
Port Disk Model
0.3 ST3320620AS
[ESC] Quit
MediaShield BIOS Mar 31 2008
- Define a New Array -
Spanned
Capacity
232.88GB
[+] Add
298.09GB
[-] Del
[F6] Back [F7] Finish [TAB] Navigate
MediaShield BIOS Mar 31 2008
- Define a New Array -
Spanned
Capacity
298.09GB
[+] Add
[-] Del
[F6] Back [F7] Finish [TAB] Navigate
Stripe Block: Optimal Optimal
Array Disks
Port Disk Model
[↑↓] Select
Optimal
Stripe Block: Optimal
Array Disks
Port Disk Model
0.0 WDC WD1200JD-9 111.79GB
0.0 WDC WD1200JD-9 111.79GB
0.1 HDS728080PLA38 76.69GB
0.2 Hitachi HDT725
[↑↓] Select
87
Capacity
[ENTER] Popup
Capacity
232.88GB
[ENTER] Popup