Foxconn Destroyer User Manual page 88

Create RAID 0+1 (striped Mirror)
1. Select "striped Mirror" from the RAID Mode. The menu appears :
RAID Mode: Mirrored
Free Disks
Port Disk Model
0.0 WDC WD1200JD-9 111.79GB
0.0 WDC WD1200JD-9 111.79GB
0.2 Hitachi HDT725
0.1 HDS728080PLA38 76.69GB
0.3 ST3320620AS
[ESC] Quit
2. Select four hard disks to build our RAID 0+1 system.
3. Press [TAB] to navigate to left drive panel, then use [→] and [↓] keys to add the hard
disks to the right drive panel.
RAID Mode: Mirrored
Free Disks
Port Disk Model
[ESC] Quit
MediaShield BIOS Mar 31 2008
- Define a New Array -
Striped Mirror
Capacity
232.88GB
[+] Add
298.09GB
[-] Del
[F6] Back [F7] Finish [TAB] Navigate
MediaShield BIOS Mar 31 2008
- Define a New Array -
Striped Mirror
Capacity
[+] Add
[-] Del
[F6] Back [F7] Finish [TAB] Navigate
Optimal
Stripe Block: Optimal
Array Disks
Port Disk Model
[↑↓] Select
Optimal
Stripe Block: Optimal
Array Disks
Port Disk Model
0.0 WDC WD1200JD-9 111.79GB
0.0 WDC WD1200JD-9 111.79GB
0.1 HDS728080PLA38 76.69GB
0.2 Hitachi HDT725
0.3 ST3320620AS
[↑↓] Select
81
Capacity
[ENTER] Popup
Capacity
232.88GB
298.09GB
[ENTER] Popup