Raid Enable In Bios; Select A Raid Array For Use - Foxconn A7VA Series User Manual

5-2 RAID enable in bIoS

1. Enter the BIOS setup by pressing <DEL> key when boot up.
2. Select the "Integrated Peripherals" from the "Main menu", then select the
Configuration" menu and press <Enter> to go to the configuration items.
3. Enable RAID function and individual SATA port for hard drive or DVD connection.
4. Press <F10> to save the setting then PC will reboot itself.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
IDE Configuration IDE Configuration
OnBoard PCI IDE Controller
OnChip SATA Channel OnChip SATA Channel
OnChip SATA Type OnChip SATA Type
SATA IDE Combined Mode
PATA Channel Config
↑↓←→:Move

5-3 Select a RAID Array for Use

When BIOS is restarted, it will display a message asking you to press [Ctrl-F] key to
enter the main menu of FastBuild BIOS. Press [Ctrl-F], the Main Menu appears.
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
Press 1..4 to Select Option
IDE Configuration
[Enabled]
[Enabled]
[RAID]
[RAID]
[Enabled]
[SATA as Primary]
Enter:Select
F1:General Help
[ Main Menu ]
View Drive Assignment. . . . . . . [ 1 ]
Define LD . . . . . . . . . . . . . . . . . [ 2 ]
Delete LD . . . . . . . . . . . . . . . . . [ 3 ]
Controller Configuration . . . . . . [ 4 ]
[ Keys Available ]
Disabled: Disable the
I IDE controller.
Enable: Enable the
IDE controller.
+/-/:Value F10:Save
F9:Optimized Defaults
76
"IDE
Help Item
ESC:Exit
[ESC] Exit