Foxconn Destroyer User Manual page 24

Audio Connector : F_AUDIO
The audio connector supports HD Audio standard.
It provides the Front Audio output choice.
Audio Connector : CD_IN
CD_IN is a Sony standard audio connector, it can be
connected to a CD/DVD-ROM drive through a CD/DVD
audio cable.
S/PDIF Out Connector : SPDIF_OUT1
The connector is used for S/PDIF output.
Fan Headers : CPU_FAN, SYS_FAN1,
SYS_FAN2, FAN1, FAN2
There are five main fan headers on this motherboard.
The fan speed can be controlled and monitored in "PC
Health Status" section of the BIOS Setup. These fans
can be automatically turned off after the system enters
S3, S4 and S5 sleeping states.
GND
1
1
POWER
SENSE
CONTROL
CPU_FAN SYS_FAN1/2
Speaker Connector : SPEAKER
The speaker connector is used to connect speaker of
the chassis.
1
GND GND
+12V +12V
SENSE SENSE
FAN1/2
17
1 2
PORT1_L AUD_GND
PORT1_R
PRESENCE_J
PORT2_R SENSE1_RETURN
SENSE_SEND EMPTY
SENSE2_RETURN
PORT2_L
9 10
F_AUDIO
CD_L GND CD_R
CD_IN
+5V
1
EMPTY
2
SPDIF_OUT
3
4
GND
SPDIF_OUT1
SPKJ 1
EMPTY
2
NC
3
4
SPKJ
SPEAKER