5-2 RAID enable in bIoS
1. Enter the BIOS setup by pressing <DEL> key when boot up.
2. Select the "Integrated Peripherals" from the "Main menu", then select the
Configuration" menu and press <Enter> to go to the configuration items.
3. Enable RAID function and individual SATA port for hard drive or DVD connection.
4. Press <F10> to save the setting then PC will reboot itself.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
SB710 SATA Controller
SB710 SATA Mode
↑↓←→:Move Enter:Select
5-3 Select a RAID Array for Use
When BIOS is restarted, it will display a message asking you to press [Ctrl-F] key to
enter the main menu of Option ROM Utility. Press [Ctrl-F], the Main Menu appears.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
Press 1..4 to Select Option
SATA Configuration
[Enabled]
[RAID]
+/-/:Value
F10:Save
F2/F3:Change Colors
[ Main Menu ]
View Drive Assignment. . . . . . . [ 1 ]
Define LD . . . . . . . . . . . . . . . . . [ 2 ]
Delete LD . . . . . . . . . . . . . . . . . [ 3 ]
Controller Configuration . . . . . . [ 4 ]
[ Keys Available ]
82
Help Item
Options
Native IDE
RAID
AHCI
Legacy IDE
ESC:Exit
F1:General Help
F9:Optimized Defaults
[ESC] Exit
"SATA