Create Raid Driver Diskette - Foxconn Destroyer User Manual

5-1 Create RAID Driver Diskette

If you want to install a brand new Windows XP on a RAID system, you need to create two
RAID driver floppy diskettes which will be used during Windows XP installation later.
1. Find a PC, put a diskette into its floppy
drive A:, put the driver CD into DVD-ROM
drive. Suggest you format the diskette first.
Right click Floppy (A:) to select Format.
2. Click on "OK" to go through this warning
message.
3. Click on "OK" to finish the format.
4. Depending on which platform your XP
system is, normally, it is a 32-bit system.
In Windows, browse CD content, and go
to CD:\Driver\Chipset\xp\IDE\WinXP\
sataraid\Floppy\Disk1, copy all the
content to the first diskette.
5. Check if the first diskette contains the
driver files.
72