Foxconn Destroyer User Manual page 96

6. The screen displays a Spanned RAID array of 421.36GB, which is the total sizes of
these three hard disks. That is, 111.79+76.69+232.88= 421.36GB. We recommend
not setting it to bootable as it will be impossible to recover if crashed. You can then
press [Ctrl]+[X] keys to exit the setup program, and restart your PC.
[Ctrl-X] Exit
7. In above screen, you also can press [Enter] to know the detailed drive information of
this RAID system. Press [D] here allow you to delete previous settings, and go back
to the first time when MediaShield was started.
RAID Mode: Spanned
Stripe Width :
[R] Rebuild
MediaShield BIOS Mar 31 2008
- Array List -
Boot Status Vendor
Healthy NVIDIA
[↑↓] Select [B] Set Bootable
Array 4 : NVIDIA SPAN 421.36G
- Array Detail -
3
Port Index Disk Model
0.0 0 WDC WD1200JD-98HBB0
0.1 1 HDS728080PLA380
0.2 2 Hitachi HDT725025VLA380
[D] Delete [C] Clear MBR
89
Array Size
SPAN 421.36G
[N] New Array [ENTER] Detail
Stripe Block: 64K
Capacity
111.79G
76.69GB
232.88G
[V] remove Vol [ENTER] Return