Hwm Info - Foxconn Destroyer User Manual

3. HWM INFO. (Hardware Monitor Information)
Click on "HWM INFO." button to display the fan's information. In this fan control panel, you can
configure five different fan's speeds.
Fan icon
Fan Operations
!
The Smart CPU Fan Feature only works with a cooler which accompanies 4-wire cable.
Click on fan icon to configure each fan's function.
ON/OFF Mode:
Only ON/OFF is available for fan speed choice.
SmartGuardian Mode :
Software: You can set the fan's speed by adjusting
a PWM Value. This value can be
selected from 0 to 127.
Automatic: The fan operates by following the
below defined values.
Start Temperature:
It allows you set a value from which the smart
fan starts its operation.
Start PWM Value:
It allows you to set an initial PWM value to drive
the fan when the Start Temperature value is
reached and smart fan begins its operation. The
higher the PWM value can achieve the faster fan
speed.
Full-Speed Temperature:
When the temperature gets over this value, the
fan will run at its full speed.
Close this page
53

HWM INFO

button