7. Unlock the right tractor by moving the sprocket lever up.
8. Insert the paper on the right sprocket pins and close the right sprocket cover.
Figure 40. Inserting the paper on the right sprocket pins
9. Match the left sprocket for the first printing position, that is, the left paper
margin must match the ninth mark on the printer cabinet.
Note: Aligning the left-hand edge of the paper past the 22
printer cabinet will cause the paper to be misaligned with the Paper
Load Sensor resulting in a '001 End of Forms' error.
nd
spacer on the
Chapter 4. Paper Handling
91
Need help?
Do you have a question about the L03 and is the answer not in the manual?