Chapter 2. Setting Up Your Printer; Choosing A Suitable Location; Printer Dimensions - Compuprint L03 User Manual

Chapter 2. Setting Up Your Printer

This section contains instructions for setting up your printer.

Choosing a Suitable Location

Consider the following points when you choose the location for your printer:
v The distance between the printer and the host computer must not exceed the
v The location must be sturdy, horizontal and stable;
v Your printer must not be exposed to direct sunlight, extreme heat, cold, dust or
v The power outlet must be compatible with the plug of the printer's power cord.
v For best continuous forms stacking, the forms should be stacked on the floor or
v For successful forms parking, the input forms stack must always be lower than
There must be sufficient clearances on all sides for easy operation. The required
space is shown in Figure 2:
Figure 2. Printer Dimensions
CAUTION:
The 4247 printer weighs 21 kg (46 lbs). Two persons are required to lift
it.
length of the interface cable;
humidity (see Appendix B, "Printer Specifications," on page 121);
on a surface below the base of the printer.
the base of the printer.
80 cm
31.5 in.
5