Label Options Path - Compuprint L03 User Manual

If LABEL is selected:
v When the paper is positioned at the
first printable line and the paper
path is changed (changing the Macro
or pressing the PATH key), or the
PARK key is pressed the printer
automatically ejects the paper
towards the rear of the printer.
v If at least one line has been printed,
or the paper has been fed forward at
least 1 line and the paper path is
changed (changing the Macro or
pressing the PATH key) or the PARK
key is pressed, the display shows
TEAR IF NECESS./EJECT PAPER. If
the paper to be ejected is longer
than 18" tear it off and press the
PARK key again to perform the
paper ejection.
If at power on the paper is already loaded in a paper path that is different to the
paper path used by the macro which is valid at power-on, independently from the
setting of the TEAR function, the display shows TEAR IF NECESS./EJECT PAPER.
If the paper to be ejected is longer than 18" tear it off and press the PARK key
again to perform the paper ejection.
In all the above cases the parking procedure may be interrupted pressing the
ALTERNATE key. The display shows OPER. INTERRUPTED.
If in any of the above cases you do not tear off the paper and the printer is not
able to park it, because it is too long, the display shows TEAR OFF PAPER/PARK
PAPER. Tear off the paper and press again the PARK key.
During the parking procedure the display shows PARKING. If the printer is
ejecting the paper (see LABEL selection) the display shows EJECTING.
LABEL
1st printable line
MACRO or
PATH or
PARK
EJECTING
HC0UG043
Figure 34. Label Options path
Chapter 3. Configuring the Printer
Other paper position
MACRO or
PATH or
PARK
TEAR IF NECESS.
EJECT PAPER
PARK
EJECTING
85