Download  Print this page

Installation - Zanussi ZCV663 User Manual

Hide thumbs


The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven lamp does not operate
Steam and condensation settle on
the food and in the oven cavity
The display shows "12.00" and
The residual heat indicator does
not come on
If you can not find a solution to the problem, refer to
your dealer or the Service Centre.
These data are necessary to help you quickly and
correctly. These data are available on the rating plate
(refer to "Product description")
• Model description ............
• Product number (PNC) ............
• Serial number (S.N.) ............
Warning! Let a qualified electrician or competent
person do repairs to the appliance.


Warning! Refer to "Safety information" chapter.
Technical Data
Top oven capacity
Main oven capacity
Warning! Do not set the appliance on a base
Possible cause
The oven is not switched on
The clock is not set
The necessary settings are not set
The fuse in the fuse box is released Control the fuse. If the fuse is released
The oven lamp is defective
You left the dish in the oven for too
A power cut
The cooking zone is not hot be-
cause it operated only for a short
Important! If you do not operate the appliance correctly,
the visit from the Service Force Centre or dealer will not
be free of charge, even during the warranty period.
the baking or roasting procedure, steam can show on
the glass.
Use small feet on the bottom of appliance to set same
level of cooker top surface with other surfaces
900 mm
600 mm
600 mm
36 l
67 l
Switch on the oven
Set the clock
Control the settings
more than one time, refer to a quali-
fied electrician.
Replace the oven lamp
Do not leave the dishes in the oven for
longer than 15-20 minutes after the
cooking process ends
Reset the clock
If the cooking zone must be hot, speak
to the Service Centre.
Hints for appliances with metal fronts:
If you open the door during or immediately after



  Also See for Zanussi ZCV663