Installation - Zanussi ZCG63330BA User Manual

SERVICE DATA
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

WARNING! Refer to Safety chapters.
TECHNICAL DATA
Dimensions
Height
Width
Depth
LOCATION OF THE APPLIANCE
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
For the minimal distances of fitting check the table.
D
We recommend that you write the data here:
899 - 917 mm
600 mm
600 mm
A
E
F
B
C
the oven cavity. Do not remove the rating plate from
the oven cavity.
.........................................
.........................................
.........................................
Minimum distances
Dimension
A
B
C
D
E
F
LEVELLING OF THE APPLIANCE
Use small feet on the bottom of appliance to set the
appliance top surface level with other surfaces.
THE STABILITY CHAIN
mm
650
450
2
400
150
less than 400
21