Service Data; Installation; Technical Data - Zanussi ZCI66050BA User Manual

Problem
comes on the hob display.
comes on the hob display.
comes on the hob display.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
Steam and condensation settle
on the food and in the cavity of
the oven.

SERVICE DATA

If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

WARNING! Refer to Safety chapters.

TECHNICAL DATA

Dimensions
Height
24
Possible cause
There is no cookware on the
zone.
The cookware is incorrect.
The diameter of the bottom of
the cookware is too small for
the zone.
The oven is deactivated.
The necessary settings are not
set.
The lamp is defective.
You left the dish in the oven for
too long.
We recommend that you write the data here:
894 - 912 mm
Put cookware on the zone.
Use the correct cookware.
Refer to "Hob - Hints and tips"
chapter.
Use cookware with correct di-
mensions.
Refer to "Hob - Hints and tips"
chapter.
Activate the oven.
Make sure that the settings are
correct.
Replace the lamp.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
the oven cavity. Do not remove the rating plate from
the oven cavity.
.........................................
.........................................
.........................................
Dimensions
Width
Depth
Remedy
600 mm
609 mm