Chapter 5. Additional Operational Information; Front Panel Generator/Parameter Controls - DigiDesign SYNC HD Manual

chapter 5
Additional Operational Information

Front Panel Generator/Parameter Controls

This section details the parameters available from the multi-function Set, Down, Up and
Run/Stop/Clear/Esc switches on the SYNC peripheral front panel. For details on the multi-function
Generator/Parameter switches, see "Front Panel Generator/Parameter Switches" on page 35.
Parameters
SYNC peripheral parameters are selected and edited using the four Generator/Parameter switches.
To select SYNC peripheral front panel parameters:
Press Set.
1
Use the Up and Down switches to scroll through available parameters, described below.
2
The 7-segment LEDs in the Generator/Parameter Display abbreviate some parameter names using nu-
merals to represent letters (such as "5" to represent "S" or "s"). The following table identifies each of
these abbreviations.
Chapter 5: Additional Operational Information 59