Additional Software On The Pro Tools Installer Disc - DigiDesign Mbox 2 Mini Getting Started Manual

Clock Source
The Pro Tools Hardware Setup dialog is set to In-
ternal, which supports recording analog signals
directly into Mbox 2 Mini analog inputs 1–2.
Configuring I/O Setup
Using the I/O Setup dialog, you can label
Pro Tools LE input, output, insert, and bus signal
paths. The I/O Setup dialog provides a graphical
representation of the inputs, outputs, and signal
routing of the Mbox 2 Mini.
Pro Tools LE has default I/O Setup settings that
will get you started. Use the I/O Setup dialog
only if you want to rename the default I/O
paths.
To rename I/O paths in I/O Setup:
Choose Setup > I/O.
1
Click the Input, Output, Insert, or Bus tab to
2
display the corresponding connections.
I/O Setup dialog for Mbox 2 Mini
To change the name of a path or subpath,
3
double-click directly on the Path Name, type a
new name for the path, and press Enter.
Click OK.
4
T
See the Pro Tools Reference Guide (or choose
Help > Pro Tools Reference Guide) for more
information on renaming I/O paths.
16 Mbox 2 Mini Getting Started Guide
MIDI Studio Setup
(Optional)
If you plan to use any MIDI devices with
Pro Tools, configure your MIDI setup with MIDI
Studio Setup. See Appendix A, "Configuring
MIDI Studio Setup (Windows Only)" for details.
Backing Up your System
Configuration
After configuring your system and Pro Tools,
you should save an image of your system drive
using a backup utility such as Norton Ghost. By
doing this, you can quickly restore your system
configuration and settings if you encounter any
problems.
Additional Software on the
Pro Tools Installer Disc
The Pro Tools Installer disc provides additional
software for your system, including audio driv-
ers (for playing other audio applications
through your Digidesign hardware) and a
Pro Tools demo session.
Refer to your Pro Tools Installer disc for ad-
ditional software and installers.
Windows Audio Drivers
The Digidesign ASIO Driver and WaveDriver
Windows System Audio Driver let you use your
Digidesign hardware interface with third-party
applications that support the ASIO Driver or
WaveDriver MME (Multimedia Extension).
The Digidesign ASIO Driver and WaveDriver for
your Digidesign hardware are automatically in-
stalled when you install Pro Tools.