What's Included; System Requirements And Compatibility Information; Digidesign Registration; About This Guide - DigiDesign Command 8 Manual

What's Included

• Command|8 control surface
• USB cable
• Power adapter
• Command|8 Guide
• Registration Information Card
System Requirements and
Compatibility Information
Command|8 can be used with any supported
Pro Tools HD or Pro Tools LE system for tactile
control of recording and mixing. Command|8
can also be used in Stand-Alone mode and
mapped to control most digital audio worksta-
tions or devices that support MIDI.
®
Digidesign can only assure compatibility and
provide support for hardware and software it has
tested and approved.
For complete system requirements and a list of
Digidesign-qualified computers, operating sys-
tems, hard drives, and third-party devices, refer
to the latest information on the Digidesign web-
site:
www.digidesign.com/compatibility
2 Command|8 Guide

Digidesign Registration

Review the enclosed Digidesign Registration
Information Card and follow the instructions
on it to quickly register your purchase online.
Registering your purchase is the only way you
can be eligible to receive complimentary techni-
cal support and future upgrade offers. This is
one of the most important steps you can take as
a new user.

About This Guide

This guide assumes you have installed Pro Tools,
and that you have an understanding of its fea-
tures and operating conventions as explained in
the Pro Tools Reference Guide.
Conventions Used in This Guide
Digidesign guides use the following conven-
tions to indicate menu choices and key
commands:
:
Convention
File > Save
Control+N
Control-click
Right-click
Action
Choose Save from the File
menu
Hold down the Control key
and press the N key
Hold down the Control key
and click the mouse button
Click with the right mouse
button