Table of Contents
Advertisement
Clock Reference, Video Ref, and
Video In Settings when Importing
Avid Video
When you import Avid video media into a ses-
sion, Pro Tools automatically sets the Clock Ref-
erence, Video Reference rate, and Video In for-
mat appropriate for the imported media.
MachineControl Configuration
If you are using Digidesign MachineControl, do
the following to establish basic communication.
To configure MachineControl:
Choose Setup > Peripherals, and click the Syn-
1
chronization tab.
In the Synchronization page, make sure the
2
SYNC peripheral is the current Synchronization
device, and DigiSerial is the selected port.
Click the Machine Control tab.
3
Enable and configure options for
4
9-pin Machine Control or 9-pin Remote.
Selecting the Transport Master
The Transport Master selector in Pro Tools lets
you select the device that will be controlled by
the Pro Tools transport. Choices include
Pro Tools and any other devices or modes you
have enabled in the Synchronization or Ma-
chine Control tabs of the Peripherals dialog.
Pro Tools Transport master
20
SYNC HD Guide
Software Configuration for
the SYNC Setup Software
Utility
(Windows Only)
To configure the SYNC Setup software on
Windows:
Make sure the SYNC peripheral is connected
1
to your computer according to the instructions
in "Serial Connections" on page 7.
Launch the SYNC Setup software utility.
2
Choose SYNC Setup > Preferences from the
3
menu in the upper left corner of the SYNC Setup
application.
If not already selected, choose the appropriate
4
serial port for the SYNC-to-computer connec-
tion.
Close the Preferences window. The SYNC
5
Setup software utility should now show that it
recognizes the SYNC peripheral in the informa-
tion display section.
Hide quick links:
Advertisement
Table of Contents
