Table of Contents
Advertisement
chapter 4
Using SYNC Peripherals
SYNC peripheral settings can be controlled in
three ways:
From Pro Tools Provides access to most SYNC pe-
ripheral controls from within the Pro Tools Ses-
sion Setup window or the Synchronization page
of the Peripherals window.
From the SYNC Peripheral Front Panel Provides
access to most controls from the front panel
when using the SYNC peripheral in Standalone
mode.
From the SYNC Setup Software Utility
(Windows Only) This optional utility provides re-
mote access to all SYNC peripheral controls
from a supported Windows computer.
For a list of controls supported with each
method, see "SYNC Peripheral Controls in
Pro Tools, SYNC Setup Software Utility, and the
Front Panel" on page 34.
About SYNC Setup Software Utility
Remote-Only Mode
When the default Remote-Only Mode (Front
Panel Lockout) is enabled in the SYNC Setup
software utility Preferences window, none of the
front panel switches are operational, and the
Remote Only LED is lit.
To exit Remote-Only mode from the front panel:
Simultaneously press and hold the Clock Ref-
erence, Positional Reference, and Frame Rate
front panel switches.
The SYNC peripheral is disengaged from Re-
mote-Only mode. This is useful when the host
computer is not easily accessible.
Chapter 4: Using SYNC Peripherals
33
Hide quick links:
Advertisement
Table of Contents
