Table of Contents
Advertisement
chapter 2
Windows Configuration
This chapter contains information for Windows
systems only. If you are installing Pro Tools on a
Macintosh computer, see Chapter 3, "Macin-
tosh Configuration."
Before installing this version of Pro Tools,
please refer to the Read Me information in-
cluded on the Pro Tools Installer CD-ROM.
Installation Overview
Installing the Digi 002 or Digi 002 Rack on a
Windows computer includes the following
steps:
"Testing Digi 002" on page 7.
1
Configuring "Windows System Settings" on
2
page 8.
"Connecting Digi 002 or Digi 002 Rack to the
3
Computer" on page 10.
When connecting Digi 002 to your com-
puter the first time, your computer should
be off. If your computer is on, power it
down.
"Installing Pro Tools LE" on page 11.
4
"Configuring Pro Tools LE" on page 15.
5
Making audio and MIDI connections to the
6
Digi 002 or Digi 002 Rack. (See Chapter 7,
"Connecting Your Studio.")
Testing Digi 002
(Digi 002 Only)
Before you install Pro Tools LE software or con-
nect Digi 002 to your computer for the first
time, you should power up the unit to be sure it
is working correctly.
When connecting Digi 002 to your com-
puter the first time, your computer should
be off. If your computer is on, power it
down.
To set up and test the Digi 002:
Plug the Digi 002 into a standard AC recepta-
1
cle, using the AC power cable included with the
unit.
Digi 002 is auto power-selecting (100V to 240V)
and will work automatically when plugged into
an AC power receptacle in any country.
Power on the Digi 002 unit by turning on the
2
power switch on the back panel. After a short
power-up sequence, the Channel Scribble Strips
on the unit show "Digi 002 Standby," and the
Standalone switch flashes to indicate Standby
mode.
Press the Standalone switch in the upper right
3
of the top panel of Digi 002. The Channel Scrib-
ble Strips on the unit will show "Enter Standal-
one Mode?"
Chapter 2: Windows Configuration
7
Hide quick links:
Advertisement
Table of Contents
