Power Supply - IBM xSeries 200 Hardware Maintenance Manual

Power supply

Before you begin:
v Read "Safety information" on page 103.
v Review the information in "Before you begin" on page 40.
To remove the power supply, do the following:
1. Power-off the server, if it is on.
2. Unplug the server.
3. Remove the cover (see "Side cover removal" on page 42).
4. Disconnect the power cables from the system board.
5. Remove the screws from the rear of the server.
6. Gently move the power supply away from the chassis and lift it out of the
78
xSeries 200 Type 8479 and xSeries 200VL Type 8481: Hardware Maintenance Manual
server.