Bezel Release Latch - IBM xSeries 200 Hardware Maintenance Manual

Bezel release latch

Before you begin:
v Read "Safety information" on page 103.
v Review the information in "Before you begin" on page 40.
To remove the bezel release latch, do the following:
1. Power-off the server, if it is on.
2. Unplug the server.
3. Remove the cover (see "Side cover removal" on page 42).
4. Remove the front bezel (see "Bezel removal" on page 43).
5. Remove the handle assembly (see "Handle assembly" on page 86).
6. Remove the top/side cover (see "Top/side cover" on page 85).
7. Press down on the tab.
8. From the underside, grasp the bezel release latch in the center and gently pull
84
xSeries 200 Type 8479 and xSeries 200VL Type 8481: Hardware Maintenance Manual
it back and away from the server.