Server Features - IBM xSeries 200 Hardware Maintenance Manual

Table 1. Features and specifications
Microprocessor: Supports one
microprocessor (depending on your
model)
®
v Intel Pentium III with 256 KB or
512 KB Level-2 cache and MMX
(MMX2) technology
or
v Intel Celeron with 128 KB Level-2
cache and MMX (MMX2)
technology
Memory:
v Minimum: 128 MB
v Maximum: 1.5 GB
v Type: PC133 MHz, ECC SDRAM,
unregistered DIMMs
v Slots: Three dual inline
Drives: (depending on your model)
v Diskette: 1.44 MB
v CD-ROM: IDE
v Hard disk drive
Expansion bays (depending on
model):
v Two 5.25-in. bays (one CD-ROM
drive installed)
v Two 3.5-in. bays (one diskette drive
installed)
v Three 3.5-in. slim-high bays
available
PCI expansion slots:
v Three 33 MHz/32-bit on the system
board (some models come with a
SCSI adapter installed)
v Two 33 MHz/32-bit on the PCI
extender board
AGP slot:
Accelerated graphics port (AGP)
(contains the video adapter)

Server features

The design of the server takes advantage of advancements in data storage and
memory management. The server includes:
v Impressive performance using an innovative approach to microprocessor
v Large system memory
4
xSeries 200 Type 8479 and xSeries 200VL Type 8481: Hardware Maintenance Manual
Power supply:
One 330 watt (90-240 V ac) Video:
ATI Rage XL
v AGP video adapter
™
v Compatible with SVGA and VGA
v 8 MB SDRAM video memory
Size:
v Height: 470 mm (18.5 in.)
v Depth: 508 mm (19.9 in.)
v Width: 165 mm (6.5 in.)
v Weight: approximately 19.5 kg (43
lb) when fully configured or 15.9
kg (35 lb) minimum
Integrated functions:
v One 10BASE-T/100BASE-TX, Intel
Ethernet controller with Alert on
™
LAN and Wake on LAN
support
v Two serial ports
v Parallel port
v Two USB ports
v Keyboard port
v Mouse port
v MIDI port
v Audio ports
– Line out
– Line in
– Mic
v Dual-channel bus mastering IDE
controller
Acoustical noise emissions:
v Sound power, idling: 5.1 bel
maximum
v Sound power, operating: 5.3 bel
maximum
utilization
The server comes with one Celeron or Pentium III microprocessor installed.
The memory bus in the server supports up to 1.5 GB of system memory. The
memory controller provides error code correction (ECC) support for up to three
industry-standard PC133, 3.3 V, 168-pin, 133 megahertz (MHz), unregistered,
synchronous dynamic random access memory (SDRAM) dual in-line memory
modules (DIMMs).
Environment:
v Air temperature:
– Server on: 10° to 35° C (50.0° to
95.0° F). Altitude: 0 to 914 m
(2998.7 ft)
– Server on: 10° to 32° C (50.0° to
89.6° F). Altitude: 914 m (2998.7
ft) to 2133 m (6998.0 ft)
– Server off: 10° to 43° C (50.0° to
109.4° F). Maximum altitude: 2133
m (6998.0 ft)
v Humidity:
– Server on: 8% to 80%
– Server off: 8% to 80%
Heat output:
Approximate heat output in British
thermal units (Btu) per hour
®
v Minimum configuration: 341 Btu
(100 watts)
v Maximum configuration: 1604 Btu
(470 watts)
Electrical input:
v Sine-wave input (50-60 Hz) required
v Input voltage low range:
– Minimum: 90 V ac
– Maximum: 137 V ac
v Input voltage high range:
– Minimum: 180 V ac
– Maximum: 265 V ac
v Input kilovolt-amperes (kVA)
approximately:
– Minimum: 0.095 kVA
– Maximum: 0.470 kVA