Table of Contents
Advertisement
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (
fAfter selecting the item, press asqw to set.
[WIRED LAN]
You can make detailed wired LAN settings.
1)
Press as to select [WIRED LAN].
2)
Press the <ENTER> button.
f The [WIRED DETAILED SETUP] screen is displayed.
3)
Press as to select an item, and change the setting according to the instructions.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]
[DNS2]
4)
Press as to select [OK], and press the <ENTER> button.
r Default wired LAN settings
f The following settings are set before the projector leaves the factory.
Note
f Before using the DHCP server, make sure the DHCP server is already functioning.
f Consult your network administrator regarding the IP ADDRESS, SUBNET MASK, and DEFAULT GATEWAY.
[NAME CHANGE]
You can change the projector name, for example, when using the DHCP server.
1)
Press as to select [NAME CHANGE].
2)
Press the <ENTER> button.
f The [NAME CHANGE] screen is displayed.
3)
Select characters with the asqw buttons and press the <ENTER> button to enter the projector
name.
f Select [ALL DELETE] to delete all the entered characters, or press the <DEFAULT> button on the remote control to
delete a character on the cursor in the entry field.
4)
Select [OK] with the as buttons and press the <ENTER> button.
f To cancel the change of the name, select [CANCEL] and press the <ENTER> button.
78 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Æ
page 45) for the operation of the menu screen.
[ON]:
If a DHCP server exists in the network to which the projector is connected,
the IP address will automatically be acquired.
[OFF]: If a DHCP server does not exist in the network to which the projector is
connected, additionally set [IP ADDRESS], [SUBNET MASK] and
[DEFAULT GATEWAY].
Enter the IP address if DHCP server is not used.
Enter the subnet mask if DHCP server is not used.
Enter the gateway address if DHCP server is not used.
Enter the DNS server address if DHCP server is not used.
Enter the alternate DNS server address if DHCP server is not used.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1] / [DNS2]
OFF
192.168.10.100
255.255.255.0
192.168.10.1
NULL
Advertisement
Table of Contents
