Specifying Utility mode parameters
Check HDD Capacity
The amount of space on the hard disk can be checked.
1
Touch [Security Settings] in the Administrator Settings screen.
2
Touch [6 HDD Setting] in the Security Setting screen.
3
Touch [1 Check HDD Capacity] in the HDD Setting screen.
The Check HDD Capacity screen appears.
4
Touch [Close].
–
To cancel changes to the settings, touch the menu item name in the
Bookmark screen to return to the selected screen without applying
the changes to the settings.
–
To finish specifying settings in the Utility mode, press the [Utility/
Counter] key. Otherwise, exit the Utility mode by touching [Close] in
each screen until the screen for the Copy, Fax/Scan or User Box
mode appears.
The HDD Setting screen appears again.
cm4521
7
7-31