Specifying Utility mode parameters
3
Touch [3 Administrator Settings].
–
An item can also be selected by pressing the key in the keypad for
the number beside the desired button. For [3 Administrator Set-
tings], press the [3] key in the keypad.
4
Type in the password, and then touch [OK].
–
For details on typing in text, refer to "Entering text" on page 8-3.
–
To finish specifying settings in the Utility mode, press the [Utility/
Counter] key. Otherwise, exit the Utility mode by touching [Close] in
each screen until the screen for the Copy, Fax/Scan or User Box
mode appears.
cm4521
7
7-5