Adding A Binding Margin - Oce cm4521 User Manual

4
– To adjust the position of the center stapling and center fold, touch
[Position Adjustment], and then specify an adjustment between -10
and +10.
9
Touch [OK], and then touch [OK] in the next screen that appears.

Adding a binding margin

A binding margin can be added to the left or right side or to the top of the
printed pages. Settings can be specified for the following.
Parameter
Margin Position
Adjust Value
Image Shift
4-14
Description
Select the location where the binding margin is to be added. If "Au-
to" is selected, a binding margin along the long side of the paper is
selected if the document length is less than 297 mm. If the document
length is more than 297 mm, a binding margin along the short side
of the paper is selected.
An area with a width between 0.1 and 20 mm can be specified. To
specify a binding margin of 0 mm, touch [None].
When a binding margin is created, the image can be shifted accord-
ing to the position of the created binding margin. The image can be
shifted between 0.1 and 250 mm left, right, up or down, depending
on the position of the binding margin. If the document is to be printed
double-sided, touch [Change Back Shift] to also specify the shift on
the back side of the pages.
Printing a user box document
cm4521