Table of Contents
Advertisement
(Fig. 7-10)
(Fig. 7-11)
will only rarely have to use the remote control of your television set.
When the digital receiver is switched on, sound volume will be set at
the level last used.
>
Adjust the volume of your digital receiver using the Volume
+ key to increase the volume, and Volume - to decrease
the volume.
>
Press the Sound on/off key to mute the sound, press the
key again to switch sound back on again.
7.4 TV/Radio switching
The pre-programmed settings include both radio and TV program-
mes.
>
Press the TV/Radio key to switch the digital receiver to
radio mode. The receiver will now switch to the radio pro-
gramme last selected.
>
Press the TV/Radio key again to revert to the TV program-
me last selected.
7.5 Selecting a different language (TV mode) resp.
station (Radio mode)
If a programme is broadcast in several languages, or with multi-
channel sound, or if several radio programmes are available on a
specific radio slot, this information will be displayed (Fig. 7-10) on
screen. You may then proceed as follows to select a different langua-
ge or a different sound channel:
>
Press the key Option. A list will now be displayed (Fig. 7-11)
on screen, indicating the languages resp. radio programmes
currently available.
>
Use the arrow keys up/down to mark the desired langua-
ge, resp. the desired radio programme, and confirm by pres-
sing OK.
You may now listen to the programme in the language selected. Your
digital receiver is also equipped to receive monaural programmes.
>
Use the arrow keys left/right to choose between Mono
channel 1 (
7.6 Return to last programme selected
>
Pressing the Back key on the remote control will take you
back to the last programme previously selected.
>
Press the key again to return to the programme previously
selected.
7.7 Display time and programme information
This function allows you to see programme information related to the
programme currently selected.
22
), Mono channel 2 (
) and Stereo (
).
Advertisement
Table of Contents
Need help?
Do you have a question about the DigitMod S1 and is the answer not in the manual?