Interrupting Download Procedure; Display Electronic Programme Guide; Now - TechniSat DigitMod S1 Operating Manual

(Fig. 7-16)
is in progress, the message Load SFI will appear in the display, fol-
lowed by a record of the volume of SFI data already downloaded
(e.g. 38%).
The duration of the downloading procedure will depend on the num-
ber of programmes included. Programmes can be shown a maximum
of seven days in advance. Based on the volume of data involved, the
more programmes are included, the shorter is the period for which
preview information can be included in the electronic programme
guide.
You can decide for yourself which programmes are to be included in
the electronic programme guide. These can then be added to the list
as described in Point 8.1.5.
7.14.2 Interrupting the download procedure
The download procedure may be interrupted by switching on the digi-
tal receiver (On/Standby key). The SFI data downloaded at the
previous download will then still be available.

7.14.3 Display electronic programme guide

> Switch on both the digital receiver and your television set.
> Press the SFI key on the remote control of the digital recei-
ver.
The electronic programme guide will now be displayed on the
screen (Fig. 7-16). Here, the programmes you have selected,
or the programmes included in the factory default settings,
will be displayed with their current programmes (see also
Point 8.2). You can now also use the SFI function to obtain
information on the contents of various programmes.
In addition, you may use the SFI functions to select a particu-
lar programme, to pre-select a programme, or to set a timer
for a programme.
7.14.4 Now (table with current programme contents)
The first SFI table to be displayed is the "Now" table (Fig. 7-16) sho-
wing the programmes currently broadcast. The yellow bar to the right
of the programme name indicates the elapsed time of the current
programme. The programme currently selected is marked.
> Use the arrow keys up/down to move the marker
through the list one line at a time. To move the marker one
page at a time, use the arrow keys left/right.
> The SFI functions (Point 7.14.3) are now available for use.
> Press the yellow function key to go to the SFI table "Next"
(see Point 7.15.5)
or
> Press the TV/Radio key to return to normal operation.
26