Table of Contents
Advertisement
(Fig. 8-12)
8.3.2 Mode
>
In this line, use the arrow keys left/right to switch the parental
control On of Off
8.3.3 Selecting channels
>
Press the OK key. The Favourites list of the category cur-
rently selected (Radio or TV) will be displayed. The program-
me currently selected is marked. (Fig. 8-12)
>
You can switch back and forth between the TV and the Radio
list using the green function key.
>
Press the red function key to open a selection window. Here
you have the option of selecting the desired type of pro-
gramme list.
>
Use the arrow keys up/down to select the desired type
of programme list (e.g. Favourites list).
>
Confirm by pressing OK. The programme list selected will be
displayed.
>
Now use the arrow keys to mark the programme to which
you wish to block access.
>
Use the yellow function key to block access to the program-
me. The parental control symbol
the programme selected.
>
To block access to several programmes simultaneously, pro-
ceed as described in 8.1.2 (Marking blocks of pro-
grammes), and block access by pressing the yellow func-
tion key.
>
When you have completed configuring the programme list
according to your preferences in this manner, press the
Menu key to return to normal operation.
>
To remove the blocking of individual programmes, proceed
as described above. Mark the appropriate programme, and
remove the parental control symbol by pressing the yellow
function key.
8.4 Programme scan (search)
as mentioned previously, your digital receiver is pre-programmed for
reception of signals from the ASTRA and EUTELSAT satellites. To
receive new programmes, or programmes from other satellites, there
are various options for performing a programme scan.
1. Automatic scan
Select this type of scan in order to search all satellites set in the
menu LNC Settings (Point 6.4 and 8.4) for programmes.
40
will be displayed next to
Advertisement
Table of Contents
Need help?
Do you have a question about the DigitMod S1 and is the answer not in the manual?