Sup-Tittles; Electronic Programme Guide; Downloading Sfi Data - TechniSat DigitMod S1 Operating Manual

7.13 Sub-titles
Where sub-titles are broadcast, this is indicated by displaying the
message Select Sub-title. If you have enabled the Sub-title
function in accordance with Point 6.3, these will be automatically
displayed, with the provision that they are being broadcast in the
language selected.
If the sub-titles are only being broadcast in other languages, or are
only available via video text, you can switch the display on manually
as follows.
> Press the Option key, if necessary several times, until the
entry Sub-titles is displayed, showing a selection table of
sub-title languages and/or video text pages carrying sub-titles
broadcast.
> Use the arrow keys up/down to mark the desired langua-
ge/video text page.
> Confirm by pressing OK. The sub-titles will now be display-
ed.
Please note that these functions are only available when sub-titles
are actually being transmitted. This setting will not be retained after
switching programmes.
7.14 Electronic Programme Guide SFI (S S iehF F ernI I nfo)
Your digital receiver is equipped with an electronic programme guide.
This means that you can display information relating to one or more
programmes on your screen.
This enables you to obtain a very quick overview of programmes cur-
rently running, or of the day's programmes, or those of the next day.
The SFI functions allow you to:
- display information on programme contents on your screen
- pre-select programmes, which will be selected automatically
when the programme/show starts
- programme timer functions
- search for and select programmes according to type (genre).

7.14.1 Downloading SFI data

The programme information will be updated by your receiver at the
update time set in accordance with Point 8.2 (SFI channel). The pre-
requisite for this is that your receiver must be in stand-by mode at
this time.
The download procedure will be indicated by the message Load SFI
o n the display. If your receiver is switched on and in operation at this
time, the function will not be executed.
You may also start the dowload procedure manually, simply by pres-
sing the SFI key immediately after switching off the receiver (i.e.
while the display shows "Stand-by"). While the download procedure
25