Deleting From The Total List; Sorting Programmes; Programming The Electr. Progr. Guide - TechniSat DigitMod S1 Operating Manual

(Fig. 8-6)

8.1.3.2 Deleting from the Total list

To remove programmes from the Total list, proceed as described in
Point 8.1.3.1. However, after calling up the programme list manage-
ment, press the red function key Programmes to first switch to
the Total list, then select the function Delete.

8.1.4 Sorting programmes

To sort the order of programmes in the Favourites list according to
your preferences, call up the programme list management as descri-
bed in Point 8.1.1. The Favourites list will be displayed and active.
> Press the blue function key Functions. A window showing
the available functions will be displayed. (Fig. 8-6)
> Use the arrow keys up/down to mark the line Sort.
> Confirm by pressing OK.
> Now use the arrow keys up/down to mark the program-
me you wish to place at a different position in the list.
> Now press the yellow function key Sort. A double arrow
will appear next to the programme selected.
> Now use either the arrow keys up/down or the numeric
keys to place the programme at the position in the program-
me list where you would like to place it.
> Press the yellow function key Sort to enter the new posi-
tion of the programme into memory.
> To sort several programmes simultaneously, mark these as
described in 8.1.2 (Marking blocks of programmes).
> Now press the yellow function key Sort. A double arrow
will appear next to the block of programmes selected.
> Now use either the arrow keys up/down or the numeric
keys to place the programme block at the position in the
programme list where you would like to place it.
> Press the yellow function key Sort to enter the new posi-
tion of the programme block into memory.
> When you have completed configuring the programme list
according to your preferences in this manner, press the
Menu key to return to normal operation.
8.2 Programming the electronic programme guide
Your receiver is equipped with the facility of receiving a data channel
with additional SFI data via ASTRA satellite system (19°East). This
gives you a preview of SFI data of up to a week in advance.
> Press the Menu key to call up the Main Menu.
> Use the arrow keys up/down to mark the line Settings.
> Confirm by pressing OK.
The sub-menu Settings will be displayed.
36