Motorola MT 2000 User Manual page 27

GETTING STARTED
Instruction
1. Create diskette label
2. If no hard disk, load DOS
3. Put new diskette in A
4. Format diskette
5. Label diskette
6. Insert diskette again
7. Start at root
8. Make FIRE directory
9. Make SECURITY directory
10. Make a TOWING directory
11. Make a COURIER directory
12. Create other directories
2-14
Table 2-6. Steps to Create Diskette Directory Tree
What to Type
FORMAT A:
CD \
MD FIRE
MD SECURITY
MD TOWING
MD COURIER
Explanation
Label formatted diskette to correspond to the
contents of the diskette such as "MTXS Archive
Files". Don't apply it to the diskette yet.
See Table 2-3 to load DOS using drive A. Remove
DOS diskettes after loading. If not at the root
directory of drive A, type: A:cd\
Insert a new diskette into A. Close the drive door.
Format the new diskette in drive A. Discard diskette
if errors occur.
Remove formatted diskette; apply label without
covering the exposed magnetic area.
Insert diskette into drive A again. Close door.
Move (change directory) to the root (uppermost)
directory of the diskette. Omit if already at root
level.
Make a directory under Root called "FIRE".
Make a directory under Root called "SECURITY".
Make a directory under Root called "TOWING".
Make a directory under Root called "COURIER".
Make more directories for each additional category
you may need.
MTSX RSS
68P81074C50