Motorola MT 2000 User Manual page 249

MTSX RSS
Decoder 2 Call Type
Use the Up/Down arrows to scroll through the available selections.
This field dictates the Decoder 2 Call Type to be used: Individual or Group. The Factory Default is Group.
Decoder Option
Use the Up/Down arrows to scroll through the available selections. This field controls the number of decoders (1
or 2) and the decode sequences to be used on this Quik-'Call II System.
This field controls the number of decoders (1 or 2) and the decode sequences to be used on this Quik-Call II
System. The Factory Default is (1) A-B.
Available selections include:
(1) A-B
(1) A-B, (2) A-C
(1) A-B, (2) C-B
(1) A-B, (2) B
(1) A-B, (2) C
(1) A-B, (2) C-D
The factory default is (1) A-B
Codes
Use the Up/Down arrows to scroll through the available selections or directly enter the desired value. Codes vary
depending on the Signalling System Type. This field contains a code that represents a Quik-Call II Tone
frequency. Codes vary depending on the Signalling System Type selected. The Factory Default is Code A, B, C,
or D.
Note: All codes A, B, C, and D should never have the same values.
Signalling Code A
Type
Motorola 138
GE 44
Plectron P1
Federal F1
Freq (Hz)
Use the Up/Down arrows to scroll or directly enter the available tones. This field represents the frequency of
audible tone in 0.1 Hz steps. Values from 288.5 to 3010.0 Hz in 0.1 Hz increments are allowed.
Note: All tones A, B, C, and D should never have the same values.
Signalling Code A
Type
Motorola 288.5
GE 457.5
Plectron 643.0
Federal 643.0
68P81074C50
Factory Defaults
Code B Code C
121
7
P10
F10
Factory Defaults
Code B Code C
600.9 1950.0
607.5 1077.5
950.0 1820.0
1299.0 2084.0
Code D
13 18
38 51
P25 P36
F16 F20
Code D
2840.0
1207.5
2932.0
2856.0
CHANGE/VIEW
6-123