Motorola MT 2000 User Manual page 174

CHANGE/VIEW
RSS LOCATION:
MOTOROLA Radio Service Software
MTSX
MAIN:CHANGE/VIEW:TRUNKING:SYSTEM
System ........................2
System Key. ..................................Disabled
System Type..........................................II/IIi
System ID............................................0001
Alias............................................Disabled
Individual ID .....................................1-0001
Connect Tone (Hz)......................#0-105.88
Coverage Type..............................Disabled
Affiliation Type ................................On PTT
Dynamic Regrouping......................Enabled
Zone ................0
Remote Monitor...............................Enabled
RM Base Time.......................................15
F1 F2
HELP ADD
SYSTEM
A Trunking System refers to a specific repeater site, the system ID, the individual radio ID for that System, the
control channel frequencies, and the connect tone required to operate on that System.
Each system that the radio is programmed to operate on is 'linked' to one or more trunking personalities. The
personality defines the features available for the radio while operating on that system. Each radio is uniquely
identified on each system by its individual ID.
PROGRAMMING PROCEDURE:
1. Press F4 at the MAIN MENU. The CHANGE/VIEW MENU appears.
2. Press F4. The TRUNKING MENU appears.
3. Press F3. The TRUNKING SYSTEM screen appears.
4. Press Tab to select the desired field, or press the desired function key (F1 - F10).
5. If a field is selected, press the up/down arrow keys to select choice or value.
6-48
At the CHANGE/VIEW MENU, press
Model:
TRUNKING SYSTEM
Chan ................0
F3 F4
PREV NEXT
SYSTEM SYSTEM
TRUNKING SYSTEM Screen for System 2, Type II/IIi
F4
Use UP/DOWN Arrows to Select Type.
F5 F6 F7
DELETE CONTROL
SYSTEM CHANNEL
F3
.
F8 F9
MORE
OPTIONS
68P81074C50
MTSX RSS
F10
EXIT