Conventional Radio Wide Options - Motorola MT 2000 User Manual

CHANGE/VIEW

6.2.3.1 CONVENTIONAL RADIO WIDE OPTIONS

RSS LOCATION:
MOTOROLA Radio Service Software
MTSX
MAIN:CHANGE/VIEW:CONV:WIDE OPTIONS
F1 F2
HELP
This screen holds the fields that allow you to change the features that affect all the conventional modes
PROGRAMMING PROCEDURE:
1. Press F4 at the MAIN MENU. The CHANGE/VIEW MENU appears.
2, Press F6. The CONVENTIONAL MENU appears.
3. Press F2. The CONVENTIONAL RADIO WIDE OPTIONS screen appears.
4. Press Tab to select the desired field, or press the desired function key (F1 - F10).
5. If a field is selected, press the up/down arrow keys to select choice or value.
FUNCTION KEY DESCRIPTIONS:
F1 - HELP provides useful information about the currently displayed menu, screen, or field.
F10 - EXIT moves the display backward in the RSS tree, one screen or menu at a time.
Fields are defined on the following page.
6-84
At the CHANGE/VIEW MENU, press
Model:
CONVENTIONAL RADIO WIDE OPTIONS
Monitor Type...............................................Open Squelch
Latch Enable Tone ...........................................Disabled
Latch Enable Time (sec) ...........................................2.0
Smart PTT Retry Timer (ms) .......................................275
Smart PTT Quick Key Timer (ms) ...............................500
Hub Defeats PL ...................................................Disabled
Direct Frequency Enabled...................................Disabled
Last Number Redial .............................................Enabled
F3 F4
F6 F2
Use UP/DOWN Arrows to Select Choice.
F5 F6 F7
MTSX RSS
.
F8 F9 F10
EXIT
68P81074C50