Program The Personality Into The Codeplug; Steps To Save Personality To Radio's Codeplug - Motorola MT 2000 User Manual

MTSX RSS

3.2.12 Program the Personality Into the Codeplug

Now that you have set values for all the features you want, it is time to actually program them into the radio.
Programming the personality into the radio's codeplug must be done after creating or editing the personality of a
radio or else the changes will be lost. Make sure that the radio is connected to the RIB and that both the RIB and
the radio are powered up before pressing F8.
Instruction
1. Go to GET/SAVE menu.
2. Go to Program Codeplug
When programming or tuning a radio DO NOT disconnect the radio from the RIB
when the computer is communicating with the radio - it may leave the radio in an
inoperable state. The only recommended time to disconnect the radio is at the MAIN
MENU or GET/SAVE screens.
68P81074C50
Table 3-10. Steps to Save Personality to Radio's Codeplug
What to Type
F3
F8
How to do it/What it Means
(Press Esc to back up to MAIN MENU.) Press F3
at the MAIN MENU to see the GET/SAVE menu.
Pressing F8 at the GET/SAVE menu advances you
to the PROGRAM CODEPLUG screen where the
current data stored in the computer's RAM (what
you can see on the RSS screens) is programmed
into the radio's codeplug.
CAUTION
TUTORIAL
3-11