Motorola MT 2000 User Manual page 219

MTSX RSS
FIELD DEFINITIONS:
Personality
Use the UP/DOWN arrow keys to select the desired conventional personality. The number may also be entered
directly or selected via the function keys.
Refer to the radio catalog sheet for the maximum number of personalities allowed for this model.
Call Alert Decode
Use the UP/DOWN arrow keys to enable MDC Call Alert Decode.
Enabling Call Alert Decode, allows the user to receive pages from the base station as well as from other radios.
The factory default is Disabled.
Call Alert Encode
Use the UP/DOWN arrow keys to enable/disable Call Alert Encode.
Enabling Call Alert Encode, makes it possible for the radio user to send pages to other radios.
The factory default is Disabled.
If this feature is enabled, and selection of target radio(s) ID(s) via Call list is to be made
available to the user, data must be programmed into the appropriate Call List Table.
Selective Call Decode
Use the UP/DOWN arrow keys to enable the MDC Selective Call Decode for this personality.
Selective Call allows the user to receive individual and group calls. It is intended not so much to ensure privacy
but to eliminate the annoyance of users receiving traffic that does not pertain to them. The factory default is
Disabled.
Unmute Type
Use the UP/DOWN arrow keys to select the muting type: AND or OR.
AND Muting: Radio must receive both the Selective Call code (or Quik-Call II tones) and the proper code
(PL/DPL and/or secure) before it will unmute.
OR Muting: Radio will unmute on proper code (PL/DPL and/or secure) or on carrier after the Selective
Call code (or Quik-Call II tone) is decoded.
The factory default is OR.
Selective Call Encode
Use the UP/DOWN arrow keys to enable/disable Selective Call Encode for this personality.
Selective Call Encode, when enabled, allows the user to send calls to an individual or to a group of radios. This
feature is intended not so much to ensure privacy but to eliminate the annoyance of users receiving traffic
that does not pertain to them.
The factory default is Disabled.
68P81074C50
NOTE
CHANGE/VIEW
6-93