Motorola MT 2000 User Manual page 177

MTSX RSS
Dynamic Regrouping
The up/down arrow keys will enable/disable Dynamic Regrouping for this radio. A system key or FTR key is
required to access this field. Otherwise, the TCMS download procedure must be used. (F3/F4). A Dynamic
Regrouping Talkgroup position (DYN) must be assigned on the zone/summary (F4/F8) screen. Enabling
Dynamic Regrouping will automatically add DYN to the list of talkgroups on that screen. Only one DYN position
may be assigned per system. Dynamic Regrouping allows the dispatcher to temporarily reassign selected radios
operating in separate fleets and/or talkgroups into a single group. Factory default is Disabled.
Zone
This is the zone position used when a radio is dynamically regrouped. This is used in conjunction with the
channel position to determine which zone/channel Talkgroup will be used during Dynamic Regrouping.
Chan
This is the channel position used when a radio is dynamically regrouped. This is used in conjunction with the
zone position to determine which zone/channel talkgroup will be used during Dynamic Regrouping.
Universal ID (Type I Only)
When trunking type I is selected, a Universal ID is used, all individual calls (Phone, Private Call, and Call Alert)
will be received if they are addressed to the Universal ID, even though the operator might have another
personality in that system selected. This simplifies individual communications with the radio. Also, the radio will
initiate all Private and Phone Calls with the Universal ID. Therefore, only one ID per radio must be enabled at the
Central Site Controller. The radio will also respond to Dynamic Regrouping commands to the Universal ID,
making it easier for a regrouping console to regroup a radio. Factory default is Disabled.
Individual ID
Enter the three digit ID for this system (Type I Only). Examples are: 001, 02A, 1FF, 200. An actual ID must be
entered, not a personality number. Use the up/down arrow keys to override the Universal ID for Individual calls.
When this option is enabled, the radio will use the PFI (Personal Fleet ID) to initiate individual calls instead of the
Universal ID. Factory default is Disabled.
Size Code
Use the up/down arrow keys to choose the SIZE CODE for this fleet.
Valid SIZE CODES are: A,B,C,D,E,F,G,H,I,J,K,M,O,Q.
The SIZE CODE determines the maximum number of fleets, subfleets, and individual IDs allowed. The SIZE
CODE and fleet ID chosen must match the programming of the Central Controller.
Size Code Prefix
A 0 - 7
B 0 - 7
C 0 - 7
D 0 - 7
E 0 - 7
F 0 - 7
G 0 - 7
H 0 - 7
I 0 - 7
J 0 - 7
K 0 - 7
M 0 - 3
O 0 - 1
Q 0 - 0
68P81074C50
Fleet Subfleet
00 - 7F A - C
00 - 0F A - G
00 - 07 A - G
00 - 00 A - O
00 - 3F A - C
00 - 1F A - G
00 - 1F A - C
00 - 0F A - C
00 - 07 A - C
00 - 03 A - G
00 - 01 A - O
00 - 00 A - O
00 - 00 A - O
00 - 00 A - O
Individual ID
000 - 00F
000 - 03F
000 - 07F
000 - 1FF
000 - 01F
000 - 01F
000 - 03F
000 - 07F
000 - 0FF
000 - 0FF
000 - 0FF
000 - 3FF
000 - 7FF
000 - FFF
CHANGE/VIEW
6-51