Channel Assignment Data - Motorola MT 2000 User Manual

MTSX RSS

6.2.2.2.1 CHANNEL ASSIGNMENT DATA

RSS LOCATION:
MOTOROLA Radio Service Software
MTSX
...TRUNKING:SYSTEM:CHAN ASSIGN
System......................................1
Rx Channel Ranges - MHz
# Status
1 Enable
2 Blank
3 Blank
F1 F2
HELP
This screen is used to enter the Channel Assignment data used for OB. (Other Band Trunking). Three different
frequency splits may be defined for each system.
After the Receive and Transmit ranges are defined, press F6 to enter the Control Channel frequencies.
This information must match the Central Controller exactly or the system will not work.
PROGRAMMING PROCEDURE:
1. Press F4 at the MAIN MENU. The CHANGE/VIEW MENU appears.
2. Press F4. The TRUNKING MENU appears.
3. Press F3. The TRUNKING SYSTEM screen appears.
4. Press F6. The CHANNEL ASSIGNMENT DATA screen appears.
5. Press Tab to select the desired field, or press the desired function key (F1 - F10).
6. If a field is selected, press the up/down arrow keys to select choice or value.
68P81074C50
At the CHANGE/VIEW MENU, press
Model:
CHANNEL ASSIGNMENT DATA
Spacing
(kHz) Start End
6.25 136.00000 136.00000
F3 F4
PREV NEXT
SYS SYS
F4 F3
Enter or Scroll to Select System.
Tx Channel Ranges - MHz
Spacing
Status (kHz)
Enable 6.25
Blank
Blank
F5 F6 7
CONTROL
CHANNEL
Caution
CHANGE/VIEW
F6
.
Start End
136.00000 136.00000
F8 F9 F10
EXIT
6-53