Motorola MT 2000 User Manual page 148

MTSX RSS
Trunk Item
Use the UP/DOWN arrow keys to select Menu functions.
Use F7 to add, and F9 to delete trunked items. Depending on your radio version and model number, you will be
able to choose from all or some of the functions listed below.
CALL
CHAN/SUB
BLANK
MSG
MUTE
PAGE
PHON
PROG
PSWD
PWR
RPGM
SCAN
SITE
STS
VIEW
ZONE/SYS
[1] For radio to function properly, this feature must also be enabled on the Trunking
System screen (F4/F4/F3).
[2] For radio to function properly, this feature must also be enabled on the Trunking
Personality screen (F4/F4/F4)
[3] For radio to function properly, this feature must also be enabled on the Radio Wide
Display Options screen (F4/F3/F6).
* For PSWD to show on RADIO WIDE DISPLAY OPTIONS screen, RADIO LOCK
must be enabled.
[4] The radio display shows 3 valid menu items per screen. When programmed menu
items are not applicable for a specific zone/channel combination, the menu items will
be discarded.
THE RADIO DISPLAY MUST CONTAIN AT LEAST 1 VALID, NON-
BLANK MENU ITEM. Failure to do so may result in improper behavior of
the radio.
68P81074C50
Select Private Call ID (2)
Select/Change Channels or Subfleets.
No Function. No tone will sound.
Select Message to be transmitted (2)
Enable/Disable the keypad beeps
Select Call Alert ID (2)
Select DTMF Phone Number to be transmitted (2)
Change Phone/Private Call/Scan lists (2)
Change Radio Lock Password (3)
Enable/Disable Tx Low Power
Enable/Disable Reprogram Request
Enable/Disable Channel Scan (2)
Change AMSS or SmartZone Site (1)
Select Status to be transmitted. [2]
View Phone/Private Call/Scan lists (2)
Select/Change zones
NOTES
WARNING
CHANGE/VIEW
6-21