Configuring Paths And Port - Motorola MT 2000 User Manual

MTSX RSS

2.13.1 Configuring Paths and Port

RSS LOCATION:
MOTOROLA Radio Service Software
MTSX
MAIN:CONFIGURATION:PC
Archive Path: ....C:\MRSS\MTSX\ARCHIVE
FLASH Software Path:...C:\MRSS\MTSX\UPGRADE
Bootstrap Code Path & Filename: C:\MRSS\MTSX\UPGRADE\MTSXBOOT.ENC
SRIB Software Path & Filename:...C:\MRSS\MTSX\SRIB\SMARTRIB.ENC
System Key: .....C:\MRSS\MTSX\SYSKEY
TCMS Path........C:\MRSS\MTSX\OFP
RIB ...............................COM 1
F1 F2
HELP
This screen is used to set default disk drive paths for archive files and backup files. It is also used to select which
asynchronous communications port (COM 1 or COM 2) the RIB (radio interface box) will be connected to.
Refer to your computer's owner's manual for a complete description of directory path names and asynchronous
communications ports.
FUNCTION KEY DESCRIPTIONS:
F1 - HELP provides useful information about the currently displayed menu, screen, or field.
F6 - COM TEST (Communications Test) is used to verify that your computer is set up properly and is able to
READ and PROGRAM a radio codeplug properly.
After your computer and RIB are connected per your Radio Service Software manual and you have
selected the appropriate communication port, turn on your radio and execute COM TEST by pressing F6.
COM TEST will verify your system is functioning properly by sending commands to the radio and checking
for the proper response. No codeplug changes will result from these commands. An OK response will be
displayed in the Status Window if the system checks OK. Otherwise, error messages will be displayed.
Consult Appendix A for proper corrective action.
F8 - SAVE is used to save the configuration information to a file on your program disk. Every time you use the
Radio Service Software the configuration that you SAVED last will be used. At anytime the configuration
may be changed and SAVED.
F10 - EXIT moves the display backward in the RSS tree, one screen or menu at at time.
68P81074C50
At the MAIN MENU, press
Model:
CONFIGURE PATHS AND PORT
F3 F4
F3
F9
.
Enter Path.
F5 F6 F7
COM
TEST
GETTING STARTED
F8 F9 F10
SAVE EXIT
2-37