Motorola MT 2000 User Manual page 259

MTSX RSS
Talkgroup Number
Use the UP/DOWN arrow keys to select the trunking talkgroup (or Subfleet) ID for this channel. The ID will be
displayed in hex. Select ATG for an announcement group, or DYN for a dynamic regrouping position, or FLT for
Fleetwide.
Valid talkgroups or subfleets for each personality must be defined on the TRUNKING PERSONALITY screen
(F4/F4/F4/F7) before they may be assigned on this screen.
The Dynamic Regrouping feature must be enabled on the TRUNKING SYSTEM screen (F4/F4/F3) in order to be
selected as a talkgroup. Announcement group and Fleetwide must also be enabled on the Trunking Personality
Screen (F4/F4/F4) to function properly.
Strapping (Read Only)
This field contains the transmit mode of the talkgroup or subfleet for trunked personality types. If set to Clear or
Secure, the talkgroup or subfleet is forced to that particular transmit mode. When set to Select, the user is
allowed to select the Secure or Clear transmit modes via the two-position concentric switch.
68P81074C50
CHANGE/VIEW
6-133