Compaq SW TL881 DLT Mini-Lib/1 Manual page 150

Table 6-2
Fault Symptom Codes
continued
FSC Message
310B Picker Jammed
3200 Elevator Jammed
3201 Elevator Jammed
3202 Elevator Jammed
3203 Elevator Jammed
3204 Elevator Jammed
3205 Elevator Jammed
3300 Passthru Jammed
Power-On Process Error Codes – 4xxx
FSC Message
4001 ROM CRC Error
4002 Ram Test Failed
4003 Xilinx Progr Error
4010 Comm UART Error
4011 Trace UART Error
4012 Barcode UART Error
4013 DLT 1 UART Error
4014 DLT 2 UART Error
Diagnostics and Troubleshooting 6-15
Motor Process Error Codes
During a stow operation, the picker
was not able to insert the cartridge
into the drive.
The elevator was not able to position
properly while attempting to recover
an orphaned cartridge.
The elevator was not able to position
properly during an inventory.
The elevator was not able to position
properly during a fetch operation.
The elevator was not able to position
properly during a stow operation.
The elevator was not able to position
properly during a home operation.
The elevator stalled while attempting
to open the DLT door.
The pass-thru elevator was not able to
position properly.
Description
Description
continued