6-8 Compaq TL881 Minilibrary System Users Guide
Table 6-2
Fault Symptom Codes - SCSI Errors
FSC
Message
1025
Overlapped Ctl Cmds
1026
Overlapped Ctl Msgs
1027
Control Process .
1028
Invalid SCSI ID
1030
Invalid SCSI ID
continued
Description
The control process sent a command
while one was in process.
The control process sent a message
while one was in process.
The SCSI control process is busy
The SCSI in NOVRAM is set to >= 8 an
the PWB is not configured for Wide
SCSI. Would only occur during SCSI
initialization.
The SCSI in NOVRAM is set to >=8
and the PWB is not configured for wide
SCSI. Only occurred during SCSI
initializing.
continued