Figure 3-29. Set Scsi Submenu Scrolled - Compaq SW TL881 DLT Mini-Lib/1 Manual

3-36 Compaq TL881 Minilibrary System Users Guide

Figure 3-29. Set SCSI Submenu Scrolled

6. With the next to line 1, press the
2 and the remains at the end of line 4, and a
line 1. Now you can use the
possible settings. Scroll downward so that 3 is displayed, then press the
button to save the new selection. An * appears to the left of the 4,
Enter
to indicate that it is the current selection.
7. Press the button repeatedly until the submenu in Figure 3-27
Escape
reappears.
8. Repeat this procedure for each configuration option you want to change.
Setting up a Mail Slot
Some of the available host software enables the system administrator to limit
access to the library as a whole while permitting insertion into or removal
from the library of one or more tape cartridges when needed. This feature is
commonly called a mail slot. It is implemented using SCSI Import/Export
elements.
In the MiniLibrary system, you can designate the magazine of any
MiniLibrary Base Module as the mail slot magazine. When you do so, the
entire magazine is withdrawn from the list of storage elements. You can
designate any number of mail slots from one slot up to the full size of the
magazine. To configure a mail slot, use the following procedure.
1. As shown in Figures 3-25 through 3-27 in the preceding procedure,
navigate from the Default Screen through the Main Menu to the
Configure Submenu.
2. Scroll down on the Configure Submenu until you see 'Set Mail Slot',
and select that option. The screen shown in Figure 3-30 appears:
SHR-1457
button. The
Enter
appears at the end of
and buttons to scroll through the
SHR-1340
moves to line