4-2 Compaq TL881 Minilibrary System Users Guide
display. Figure 4-1 shows a typical Default Screen. Yours may vary depending
on the number of drives in your library (second line), and the number and
locations of cartridges in the magazine (fourth line).
Figure 4-1. Default Screen
1. At the Default Screen, press the Enter button. The Main Menu shown in
Figure 4-2 appears:
Figure 4-2. Main Menu
2. Press the
button three times to move the
press the Enter button. The display will show the Configure Submenu,
shown in Figure 4-3. The
there are additional configuration options that can be reached by
scrolling with the
button.
Figure 4-3. Configure Submenu
To select a configuration option, press the
control panel until the
want to change. In this case, let us choose Set Data Format. Press
the Enter button to display the choices for that option. If your
Base Module has two drives, the submenu shown in Figure 4-4
appears.
SHR-1458
SHR-1331
to Configure Menu, then
at the end of the fourth line means that
SHR-1332
or
on the display is next to the option you
button on the