4. Press the
button repeatedly to select Set Special Configuration, as
shown in Figure 3-21:
Figure 3-21. Configure Submenu, Scrolled
5. Press the
Enter
button. The screen shown in Figure 3-22 appears:
Figure 3-22. Special Config Submenu
6. ress the
button repeatedly to scroll down to select Alternate Config,
as shown in Figure 3-23:
Figure 3-23. Special Config Submenu, Scrolled
7. Press the
Enter
and then
Enter
again and after selection stops flashing. The screen shown in
Figure 3-24 appears:
Figure 3-24. Acknowledgment Screen
SHR-1333
SHR-1334
SHR-1335
button to change the line to 'Slave'. Press
SHR-1336
Installation 3-33