Hp Tft7600; Tft7600 Rear Ports; Hp Tft7600 Rack-Mount Keyboard And Monitor - HP Cluster Platform Introduction v2010 Introduction Manual

• TFT7600 rack-mount keyboard and monitor (see
• TFT5600 rack-mount keyboard and monitor (see
• Four-port console switch for Cluster Platform. (see
• Console switch for Cluster Platform and Scalable Visualization Array (SVA). (See
Section 2.7.4).
• Expansion module for SVA (see
• Server blade access through the local KVM (see

2.7.1 HP TFT7600

This section describes the TFT7600 rack-mount keyboard and monitor, which is mounted in the
utility rack (UXR). The TFT7600 is mounted on rails with space available to add a 1U console
switch box behind the unit. The TFT7600 uses a 17 inch (43.18 cm) color active matrix TFT LCD
(see Figure 2-17). The TFT7600 is connected to the administration node and to one other service
node. You must make this connection during system installation, as described in
Note:
The TFT7600 is installed in recent models of Scalable File Share (SFS) systems and HP Cluster
Platform.
Figure 2-17 HP TFT7600 Rack-Mount Keyboard and Monitor
The following list corresponds to the callout in
1. On Screen Display Activation (OSD) button and OSD scroll up and down button.

2.7.1.1 TFT7600 Rear Ports

The TFT7600 rear ports are shown in
(see callout 7 in
46 Platform Core Components
Section
Figure
Figure 2-18) must be completed as shown in the TFT7600 Installation Instructions.
Section 2.7.1)
Section 2.7.2)
Section 2.7.3)
2.7.5)
Section 2.7.6).
Figure 2-17:
2-18. Arrangement of the cables in the cable tray
Section 3.2.